| Model |
5102 |
5122 |
5152 |
| Size |
10" |
12" |
15" |
|
Thiele/Small Parameters |
| Fs (free-air
resonance, Hz) |
39.13 |
38.44 |
30.67 |
| Vas (equivalent
compliance, cu. ft.) |
0.56 |
1.13 |
3.91 |
| Vas (equivalent
compliance, liters) |
15.90 |
32.15 |
110.95 |
| Qms (Q, mechanical) |
7.99 |
9.27 |
7.94 |
| Qes (Q, electrical) |
0.70 |
0.85 |
0.74 |
| Qts (total driver Q) |
0.64 |
0.78 |
0.68 |
| Re (DC resistance,
ohms) |
3.4 |
3.4 |
3.8 |
| Z (nominal impedance,
ohms) |
4.0 |
4.0 |
4.0 |
| Le (inductance, mh) |
1.14 |
1.19 |
1.43 |
| Efficiency (2.83V @
1M, dB) |
86.26 |
88.21 |
91.24 |
| Xmax (one way linear
excursion, in.) |
0.74 |
0.74 |
0.74 |
| Xmax (one way linear
excursion, mm) |
19.00 |
19.00 |
19.00 |
| Pe (continuous power
handling, watts) |
800 |
800 |
800 |
| Peak power handling
(music, watts) |
1200 |
1200 |
1200 |
| SPL power handling (SPL
burst, watts) |
1500 |
1500 |
1500 |
| Mms (total moving
mass, grams) |
135.81 |
166 |
232 |
| Cms (mechanical
compliance, mm/N) |
122.000 |
103.000 |
116.000 |
| Bl (motor strength,
Tesla-M) |
12.64 |
12.75 |
15.01 |
| Sd (effective
radiating area, sq. cm.) |
304.81 |
471.44 |
824.48 |
| Sd (effective
radiating area, sq. in.) |
47.24 |
73.07 |
127.79 |
| Frequency range (Hz) |
30-2.5k |
30-2.5k |
30-2.5k |
| Energy Bandwidth
Product (EBP) |
56 |
45 |
41.45 |
| Model |
5102 |
5122 |
5152 |
| Driver
Physical Dimension |
| Mounting hole diameter
(inches) |
9.4 |
11.1 |
13.95 |
| Mounting depth (inches
*) |
6 |
6.5 |
7.5 |
| Basket diameter
(inches) |
10.5 |
12.3 |
15.6 |
| Typical sealed
enclosure (cu. ft.) |
0.49 |
1.15 |
2.00 |
| SPL sealed enclosure
(cu. ft.) |
0.33 |
0.80 |
1.75 |
| Low Qtc sealed
enclosure (cu. ft.) |
0.85 |
1.75 |
5.50 |
| Vented enclosure (cu.
ft.) |
1.0 |
1.3 |
1.95 |
| Port tuning frequency
(Hz) |
45 |
45 |
45 |
| Port diameter (inside,
in.) |
3 |
4 |
5 |
| Equivalent square port
(in.) |
2.65x2.65 |
3.54x3.54 |
4.43x4.43 |
| Port length (in.) |
7.7 |
10.47 |
9.48 |
| Enclosure
Details |
| 1. Volumes
given above are net tuning volume |
| 2. Add
driver displacement and port displacement
(if applicable) for gross volume |